Measure pad carrier (or slide pin distance if pad carrier is missing) · Identify if single or double piston
BRIDGE — Named for area around retainer bolt
FLAT — No indentation
POCKET — Metal removed but does not go through
WINDOW — There are holes in the bridge (note the shape)
Other areas to compare:
Shape of pad slot — straight or rounded
Front corner of bridge — look for shape and ‘dimples’
Mounting surface to caliper
BRIDGE — Named for area around retainer bolt
FLAT — No indentation
POCKET — Metal removed but does not go through
WINDOW — There are holes in the bridge (note the shape)
Other areas to compare:
Shape of pad slot — straight or rounded
Front corner of bridge — look for shape and ‘dimples’
Mounting surface to caliper
* Color of retainer bar may vary.
** Single piston calipers include pad pressure plate.